Summary of several maintenance skills of plastic shredder
If you have used a plastic shredder, I believe you must know that the plastic shredder must pay attention to maintenance. However, this does not prevent the failure of the plastic shredder, and what we can do is to reduce the probability of failure to a relatively low level. Nevertheless, we still cannot avoid that the plastic crusher does not malfunction. In this case, we should learn more about the maintenance knowledge of some plastic crushers to be more practical.
Plastic Shredder Now, we will share with you some of the maintenance skills of plastic shredder, which can be summarized as follows:
1. In the process of daily use, it is necessary to check the rotation of the disc from time to time, and control the rotation speed of the disc in a reasonable range according to the specific regulations of the plastic particle grinder, so as not to affect the product due to the too fast speed of the disc granularity.
2. If the plastic crusher finds abnormal noise, it should stop immediately, and check whether the parts of the plastic particle crusher are lost during transportation, and whether the bolts are loose. Since the plastic crusher rotates the main shaft pulley, check the rotation Whether there is collision phenomenon.
3. It is strictly forbidden to mix iron and sundries in the crushed materials of the plastic crusher. After connecting the motor, check whether the direction of rotation is correct.
4. In the process of use, special attention should be paid to the inspection of the transmission parts of the plastic pellet machine, namely the transmission gear. The rotation of the transmission gear is completed with the assistance of lubricating oil. Therefore, during the operation of the gear, The lubrication must be checked regularly.
5. The overall structure of the plastic shredder is supported by the frame. When the machine is running, pay attention to check whether the anchor bolts connecting the frame and the foundation ground are firm or not. If you find that the bolts are loose, you must be timely , Otherwise the plastic pellet machine will produce strong vibration and noise during operation.
6. Since the plastic grinder is a wet granulation model, the upper part of the disc is usually equipped with a spray device to moisten the material to increase the viscosity of the material, so to ensure that the material has good adhesion, you should always check the spray Device to ensure the smooth flow of water in the spray device.