Working principle of vibrating screen
There are two kinds of Xucai vibrating screens, one is circular vibrating screen and the other is square vibrating screen. Screens of different sizes can be customized according to customer requirements.The sieve frame and sieve screen usually made of stainless steel.
The vibrating screen is driven by a vibrating motor, and the eccentric block installed on the high-speed rotating shaft vibrates the entire screen surface, so that the material is divided into multiple layers and screened out according to different sizes of particles.
The specific workflow is as follows:
1. The material enters the screening machine and is evenly distributed on the screen surface;
2. The vibrating screen starts to vibrate, and the vibration frequency and amplitude can be adjusted according to the different characteristics of the material;
3. Due to the vibration of the vibrating screen, the material is constantly turning, rolling and passing through the screen holes on the screen surface;
4. Materials with different particle sizes are separated on the sieves with different sizes of sieve holes, the larger particles are retained in the upper layer, and the smaller particles are sieved to the lower layer;
5. The materials separated from different levels are transported to the next process through the material outlet for processing or packaging.
The working principle of the vibrating screen is to continuously roll and turn the materials on the screen surface through vibration, and then separate the materials through screens of different sizes and shapes. Vibrating screens are widely used in the screening, grading and separation of granular materials in food, chemical, pharmaceutical, ceramic and other industries.
