Why is the plastic shredder blocked?
The advantages of using plastic shredders and why are plastic shredders blocked? The following is the answer from the plastic shredder manufacturer machinery. There are many advantages of plastic shredders. First of all, after we understand plastic shredders, we can find such products, which can maximize production efficiency and speed during the entire use process. Secondly, using such products can also add more complexity. The surface problem is solved, and if you consider it from a comprehensive perspective, the advantages in the entire process will indeed be great. The plastic shredder can remove more defects from the workpiece at one time without damaging the product. Now many companies have chosen this product in order to increase their production. The plastic shredder is actually very simple. If you know these The use value of the device is generally used after it is in your hand. Secondly, if you are interested in such a product, you can generally operate it in 10 minutes after your own research and attention.
Reasons for the blockage of the universal powder machine:
1. The feed rate is too fast and the load increases, causing blockage. During the feeding process, it is necessary to be careful at any time that the deflection angle of the ammeter pointer is large. If it exceeds the rated current, the motor is overloaded, and the motor will be burned out forever. It is also possible to change the feeding method and control the feeding amount by increasing the feeder. There are two types of feeders: manual and active. The user should choose the appropriate feeder according to the actual environment. Due to the high speed of the plastic crusher, the large load, and the strong turbulence of the load. Therefore, the current when destroying the machine is usually controlled at about 85% of the rated current.
2. The hammer is fragmented, aging, the screen mesh is closed and ragged, and the damaged material has too high water content, which will block the plastic grinder. The broken and severely aged hammers should be updated regularly to maintain the excellent working condition of the destroyer, and regularly check the screen. The moisture content of the destroyed material should be less than 14%, which can improve production compliance and prevent the plastic crusher from clogging , Strengthen the reliability of the destruction machine.
3. Unsmooth discharge pipeline or blockage. Feeding too fast will block the air outlet of the plastic crusher; improper deployment of the vertical chamber with the transportation equipment will cause the discharge pipeline to weaken or be blocked after no wind. After the obstruction is detected, the transportation setup equipment deployment that does not change at the delivery port should be cleared first, and the feed volume should be adjusted to make the setup equipment deployment work normally.