What should you pay attention to in daily maintenance of the three-in-one dehumidification dryer?
The three-machine dehumidification dryer is controlled by a microcomputer, with simple operation, stable performance and lower energy consumption. The drying air volume can reach 30~200 m3/hr, and can dry to a moisture content of less than 0.02%, solving the problem of poor transparency and sprue Defects include sticking, bubbles, slivers, cracks, poor dimensional stability, internal stress, and insufficient physical strength of the product. The three-in-one dehumidification dryer has high working efficiency, excellent drying effect, and is widely used in industries. For such a high-performance dehumidification and drying equipment, daily maintenance is essential. Below, Guangzhou Xucai Environmental Technology will introduce to you the daily maintenance methods of the three-in-one dehumidification dryer:
1. When cleaning the machine body, do not use thin rods or wires to dig inside the machine to avoid malfunction or danger.
2. Clean the air filter regularly (about once every ten days) to maintain the dehumidification and dust removal efficiency of the machine and extend its service life. To clean the air filter, wash it with clean water below 40℃. It is better to use detergent to clean it. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body.
3. The air filter should be cleaned once every ten days. It is recommended that a new air filter must be replaced every six months. If the air filter is damaged, oily, or wet, please replace or install it to avoid affecting the function of the dehumidifier.
4. The condenser should be cleaned frequently and kept clean. There should be no obstructions blocking the air inlet and outlet, and the air filter should be cleaned.
5. The water storage capacity is too full to avoid overflow and wet the ground. When transporting the machine while the machine is in operation due to production, please unplug the power cord first, and then drain the water in the water tank.
6. The machine body must be placed flat and cannot be tilted or tipped sideways to avoid machine failure or abnormal noise.
7. Please unplug the power cord when the equipment is out of power or not used for a long time.
8. When servicing this machine, please turn off the stop switch first, so that the temperature drops below 50°C. After turning off the main power supply, the maintenance worker wears gloves to perform maintenance, cleaning, etc.
Guangzhou Xucai Environmental Technology Co., Ltd. is a manufacturer specializing in the R&D and manufacturing of plastic auxiliary equipment.We professional production plastic dryer,plastic crusher,plastic mixer,vacuum auto loader,industrial water chiller etc.We accept OEM service.
