What are the reasons for the material blocking or non-discharge phenomenon in the plastic crusher?
1.Too little material enters the crushing chamber, and the material rolls upwards driven by the airflow inside the crushing chamber, causing the plastic crusher to not discharge.
Solution: continue to add materials inside crushing.
2.The gap between the blades is too large to cause the material to be unloaded. When crushing different materials, the gap between the blades of the plastic grinder should be adjusted so that the materials can be repeatedly crushed.
Solution: Adjust the blade gap to a suitable position.
3.The sieve hole is too small and the bottom of the sieve is blocked due to the feeding plastic too fast.
Solution: Replace the screen sieve with a larger hole.
4. For large plastic shredders, Guangzhou Xucai Machinery is generally equipped with a feeding belt conveyor as standard. Customers need to adjust the discharge according to the actual material during production to avoid blocking the bottom of the screen caused by the slow discharge speed. Material phenomenon.