Talk about how to deal with the failure of the plastic shredder?
Plastic shredder, as a kind of blade shredder, uses the shearing and closing effect of the movable knife and the fixed knife to cut and smash the materials entering the machine cavity. In this process, after shearing, it meets the sieve of the plastic shredder. The net-sized materials pass through the bottom screen to filter out the plastic pulverizer, while the plastic flakes larger than the aperture of the screen roll upward under the action of the internal airflow, and then enter the knife-edge cutting area for further crushing. Let's follow the editor to understand the plastic shredder, how to deal with the failure of the material? Let's understand.
1. Too little material enters the machine cavity, and the material rolls upwards driven by the airflow inside the machine cavity, causing the plastic grinder to not discharge. Solution: continue to add materials.
2. The gap between the blades is too large, and the gap between the blades of the plastic shredder should be adjusted so that the material can be repeatedly crushed when crushing different materials. Solution: Adjust the blade gap to a suitable position.
3. The sieve aperture is too small and the bottom of the sieve is blocked due to the feeding plastic too fast.
4. Large-scale plastic crushers are generally equipped with a discharge conveying mechanism as standard. Customers need to adjust the discharger according to the actual material during production to avoid the phenomenon of blocking the bottom of the screen caused by the slow discharge speed.
