The maintenance and care of recycled plastic crushers are essential to extending the life of the equipment and improving production efficiency. Below is a detailed summary of maintenance methods:
1.Maintain ventilation: The plastic crusher should be placed in a well-ventilated area to help dissipate heat, prevent the motor from overheating, and extend the service life of the equipment.
2.Regular lubrication: Lubricating oil should be added to the bearings regularly to ensure they are well-lubricated, reducing wear and allowing smooth operation.
3.Check knife screws: After the new equipment has been used for 1 hour, it is necessary to check and tighten the screws of the moving and fixed knives to ensure a firm connection between the blade and the knife holder, preventing loosening.
4.Keep the knife sharp: The sharpness of the knife should be checked frequently. Dull knives should be polished or replaced promptly to avoid damage to other parts of the equipment caused by dull blades.
5.Knife gap adjustment: When replacing the knife, the gap between the moving and fixed knives should be adjusted. It is recommended to maintain a gap of 0.8 mm for crushers above 20HP and 0.5 mm for those below 20HP. If the recycled material is thin, the gap can be appropriately increased.
6.Remove residual debris: Before starting the equipment each time, remove any residual debris in the machine chamber to reduce starting resistance. Regularly open the inertia cover and pulley cover, clean the ash outlet under the flange, and prevent powder from entering the shaft bearing.
7.Ensure proper grounding: Ensure that the equipment is well-grounded to prevent safety hazards caused by static electricity accumulation or leakage.
8.Check the belt tension: Regularly check whether the belt is loose. If it is, adjust it in time to maintain belt transmission efficiency and equipment stability.
Regular maintenance and care can not only extend the service life of the recycled plastic crusher but also effectively reduce failures and improve production efficiency.


