In general plastic crusher most models can be broken plastic bags, but one thing, is the state machine efficiency and running is stable, can ensure a workshop plastic crushing plant normal operation, Taiwan akira machinery plastic crusher this respect for the safety and stability of plastic crusher mute, multi-function, high efficiency etc, Breaking plastic bags is more efficient and safer.
With the plastic bag crusher has a good crushing effect, more and more enterprises begin to choose the crusher, in order to achieve the purpose of the crusher, such as plastic bags, waste film, etc. However, during the long use of the machine, failure is inevitable. Especially in the harsh environment or complex environment work, more prone to failure, such as mechanical impurities, will bring serious damage to the machine.
Plastic bag crusher
Common mechanical impurities refer to metal shavings, wear products of parts, foreign dust, soil and other non-metallic substances produced in the process of use. Once these impurities get inside the equipment, they will cause serious damage to the machine. This not only accelerates the wear of the parts, but also scratches the tool shaft and all friction surfaces, causing damage to the lubrication film, so that the temperature of the parts increases, causing deterioration of the lubricating oil.
It has been determined that when the mechanical impurity of lubricating oil reaches 0.15%, the wear of the engine piston ring is 2.5 times of the normal value, and the service life of the rolling bearing is reduced by 80%-90% after entering the impurity particles. Therefore, the harm caused by mechanical impurities is still very great.
The working environment is not very good to change, what should we pay attention to when using plastic bags of crusher?
1.Using high quality, supporting parts and lubricating oil, grease, blocking harmful impurity source.
2.Do a good job of mechanical protection on site to ensure that relevant parts can work normally and prevent various impurities from entering the machine.
3.On the failure of the machine, try to go to the regular place for maintenance. During field maintenance, protective measures should also be taken to prevent replacement parts during field repair, so that they are contaminated by impurities before entering the machine.
4.Clean the machine, clean the crushed material and adhesive material of the external and internal crushing bin.
5.Daily check whether the feed port is safe and stable.
6.Daily check whether the knife edge of plastic bag crusher is normal without damage. Note: The plastic crusher, especially the blade, is a vulnerable part. If the blade is damaged and bent, it may cause the shaking of the plastic crusher machine. This should be used as a daily detection task.
